manualshive.com logo in svg

D-Link SECURICAM Network DCS-900W, User Manual, Page: 68 / 99

Share
Download
D-Link SECURICAM Network DCS-900W User Manual Download Page 68

68

Camera Property Settings > Recording

File Path

The software will create a folder in the 

Recording File Path

 specified and record the

video images with the file name by date and time.  Multiple file paths can be specified to
store your video images.  The current path where recorded images are being stored is
designated as “Working”.  Once this path has reached full capacity, the images will then
be stored in the next designated file path. To change file paths, highlight the file path and
double-click to select a new drive/directory to store your video images.

The screen below will appear.  Click 

Browse 

to select a drive/directory, and place a

check mark in the 

Path

 box to enable the drive/directory for use. Click 

OK 

to save your

changes.

Be sure to click 

Apply

 to save your settings, then click 

OK

 to exit this screen.

Note:

 

If you are using Windows Media Viewer to view your recorded videos, make sure

that you have the most up-to-date version in order to view the videos correctly.

File Options

You can adjust the maximum file size by clicking on 

File Size

 from the 

Recording File

Options 

field. The file size must be between 10 and 50MB. If the recorded video files

reach the file size allocated, video images will be recorded into another file automatically.

IPView Lite 

(continued)

Summary of Contents for SECURICAM Network DCS-900W




































































































Reviews:

No comments