D-Link SECURICAM Network DCS-900W, User Manual, Page: 37 / 99

37
Protocol:
Two options are available for linking with the Time Server. The default setting is NTP .
Select the time for the Linux time server.
TimeZone:
The System administrator must select the time zone for the region. Please refer to the
Appendix for the time zone selection table.
To set the Time manually select Set Manually . The system administrator must then
enter the Date and Time in the respective field manually. When Set Manually is selected,
each time the DCS-900W is powered off, the time must be reset manually at reboot.
Apply/Cancel:
After making sure all settings are correct, click on the Apply icon to store the settings
in the DCS-900W. You can alternatively click on the Cancel icon if you do not wish to
make changes to the DCS-900W.
Tools > Time
DCS-900W Configuration
(continued)