manualshive.com logo in svg

D-Link SECURICAM Network DCS-900W, User Manual, Page: 16 / 99

Share
Download
D-Link SECURICAM Network DCS-900W User Manual Download Page 16

16

The IP Address of your camera must
correspond with your network settings
for you to access the camera. If you are
unsure of what these settings should
be, please check with your network
administrator.

By default, the Admin ID and Password
are blank. If you are running this Setup
Wizard for the first time, leave both
Admin ID and Password fields blank
and simply click OK to continue. If you
want to enter the Admin ID and
Password, enter them and click OK to
continue.

This screen appears if the default IP
Address of the camera (192.168.0.20)
does not correspond with your local
area network settings. You must assign
an IP address for your camera that
corresponds to your network’s IP
addressing scheme.

Click 

Yes

Click 

OK

Click 

OK

Using the Setup Wizard 

(continued)

If you change any of the default settings in the Setup Wizard, the following screens
may appear:

Summary of Contents for SECURICAM Network DCS-900W




































































































Reviews:

No comments