manualshive.com logo in svg

D-Link SECURICAM Network DCS-900W, User Manual, Page: 38 / 99

Share
Download
D-Link SECURICAM Network DCS-900W User Manual Download Page 38

38

Status

The 

Status 

menu displays information about your DCS-900W

.

Click on 

Status

 and the Information screen will appear as illustrated below:

The Information table provides detailed information about the DCS-900W such as the
Model Name, Firmware Version, Mac Address, and IP Address

.

Tools > Default

The 

Default 

tab contains commands for restarting the DCS-900W.

Click on 

Tools

, then the 

Default 

tab in the left hand panel and the 

Tools 

screen will

appear as illustrated below

Factory Reset:

A factory reset restarts the DCS-900W and returns all settings to their default values.
The Factory Reset will prompt you with a “Do you really want to factory reset this
device?” message and a YES button. If you do not want to carry out a factory reset
command, exit the panel without clicking YES, otherwise click on the 

“YES”

 icon and

factory reset will be initiated.

Warning

All settings must be reconfigured after a Factory Reset!

DCS-900W Configuration 

(continued)

Summary of Contents for SECURICAM Network DCS-900W




































































































Reviews:

No comments