manualshive.com logo in svg

D-Link SECURICAM Network DCS-900W, User Manual, Page: 54 / 99

Share
Download
D-Link SECURICAM Network DCS-900W User Manual Download Page 54

54

How to Rotate the Video view

In 

View Mode

 format, click on the icon located on the upper left corner of the screen and

a pop-up menu will appear.

Once you click 

Rotate Right

 or 

Rotate Left

 in the menu, the video will rotate 90 degrees

to the right or left.

How to take a Snap-Shot with the Camera

To take a snap shot with the camera, you must highlight the camera you wish to use
from the 

IPView 

Lite list view format.

 

From the menu bar select 

Camera > Snap

shot.  A 

Save

 

Image

 dialog box will appear for you to save the snap shot picture.

Alternatively, select from the viewing mode either 1 or 4 cameras.  Click on the icon
located on the upper left corner of the screen.  A case sensitive menu will appear.  Select
the 

Snap shot

 icon.  A

 Save Image

 dialog box will appear for you to save the snap shot

picture.

IPView Lite 

(continued)

Summary of Contents for SECURICAM Network DCS-900W




































































































Reviews:

No comments