![background image](http://html.mh-extra.com/html/d-link/securicam-dcs-6511/securicam-dcs-6511_user-manual_77779011.webp)
11
D-Link DCS-6511 User Manual
Section 2 - Installation
Adjust the Viewing Angle of the 3-Axis Mechanism
Turn the lens module left and right until the desired position is achieved; tighten the pan
screw once completed.
Loosen the tilt screws on both sides of the camera, and turn the lens module up and down
until the desired position is achieved; tighten the tilt screws once completed.
Turn the lens to adjust the IP camera’s image until the desired orientation is achieved. Tighten
the image adjustment screw once completed.
Adjusting the Viewing Angle