![background image](http://html.mh-extra.com/html/d-link/securicam-dcs-6511/securicam-dcs-6511_user-manual_77779054.webp)
54
D-Link DCS-6511 User Manual
Section 3 - Configuration
Advanced
This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical interface for
digital output (DO) and digital input (DI) that is used for connecting a diversity of external alarm devices such as IR-Sensors and alarm relays. The
digital input is used for connecting external alarm devices and once triggered, images will be taken and e-mailed.
Select D/I or D/O Mode:
LED:
Video Output:
The camera will send a signal when an event is triggered,
depending upon the type of device connected to the DI
circuit.
N.C. stands for
Normally Closed
. This means that the
normal state of the circuit is closed. Therefore events are
triggered when the device status changes to
Open
.
N.O. stands for
Normally Open
. This means that the
normal state of the circuit is open. Therefore events are
triggered when the device status changes to
Closed
.
You may specify whether or not to illuminate the LED on
the side of the camera.
Enable/ disable the BNC terminal TV output signal.
Digital Input/Output