manualshive.com logo in svg

D-Link PS Admin, User Manual

Share
Download
D-Link PS Admin User Manual Download Page 131

Print Server Administration User’s Guide

Appendix: Telnet Interface Administration

125

WARNING:

Do not perform a factory reset unless you are absolutely sure
this is what you want.  All settings, including the print server’s
TCP/IP network address, will be erased and replaced with
their original values.

To reset the print server,

1.

 

Choose Tools from the Main Menu.

 

[Tools]

1 - Reset

2 - Factory Reset

3 - Reload Firmware

0 - Return to Main Menu

Enter Selection:

2.

 

Choose the Reset or Factory Reset menu item, depending on
the type of reset you wish to perform.  The print server will
ask for confirmation:

 

Do you really want to reset the print server?

(y/n)

3.

 

Confirm the reset by entering 

y

 and pressing Enter.  The

telnet connection will drop, and the print server will reset
itself.  If you selected Factory Reset, all of the print server’s
default configuration values will be restored.

Summary of Contents for PS Admin









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands