D-Link PS Admin User Manual Download

Page: 112 / 136

Print Server Administration User’s Guide

106

PS Admin Administration

Make sure you have backup copies of the previous version of
the firmware image files before overwriting them with the
new ones.

Choose Reload Firmware... from the PS Admin Tools
menu. The print server will ask for the filename of the
updated

.bin

image file.

Type in the pathname of the

.bin

file, or click the Browse...

button to locate the file using a standard dialog box.

Click OK. PS Admin will display an informational warning
message.

Click OK. The download will begin. PS Admin will display
the progress of the download.

When downloading is complete, PS Admin will display an
informational message.

WARNING:

When downloading the image file, be very careful not to
interrupt the transfer by powering down the print server or
disconnecting it from the network. The print server should be

Summary of Contents for PS Admin









































































































































Search results

Summary of Contents for PS Admin

Reviews:

Related manuals for PS Admin

Brands by name

Popular brands

D-Link PS Admin, User Manual

Search results

Summary of Contents for PS Admin

Reviews:

Related manuals for PS Admin

Brands by name

Popular brands