46
D-Link DNR-202L User Manual
Section 5 - Configuration
Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be automatically
updated to your NVR.
You may obtain a static or fixed IP address and other network
information from your network administrator for your NVR. A static
IP address will simplify access to your NVR in the future.
The static IP address.
The default value “255.255.255.0” is used to determine if the
destination is in the same subnet.
The gateway forwards frames to destinations in a different subnet.
Invalid gateway settings may cause the failure of transmissions to
a different subnet.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the primary one.
Under Static IP, enable or disable the DHCP server. If your network
doesn’t have a DHCP server, enable NVR DHCP server for easier local
network setup. You can configure the DHCP IP address range and
DHCP lease time manually.
Enable Bonjour for multicasting. You can customize the NVR name
for identification by Bonjour services.
Network Setup
DHCP:
Static IP:
IP Address:
Subnet Mask:
Gateway IP Address:
DNS1:
DNS2:
DHCP Server:
Apple:
Click the Setup icon
to continue to configure advanced settings manually.
Setup
