32
D-Link DNR-202L User Manual
Section 5 - Configuration
Configuration
Using the Configuration Interface
After completing the Setup Wizard, you are ready to use your NVR. The NVR's built-in web configuration utility is designed to
allow you to easily access and configure your DNR-202L. At the end of the wizard, click
Go to NVR
, or enter the IP address of
your NVR into a web browser, such as Internet Explorer. To log in, use the username
admin
and the password you created in
the Setup Wizard. If you did not create a password, the default password is blank. After entering your password, click
OK
.
Step 2
Enter your NVR credentials to access the configuration interface.
Step 1
Click
Go to NVR
to continue to the NVR web configuration page.
