D-Link EasySmart Switch User Manual
36
Figure 307 – Security > Static Mac Address
NOTE:
DGS-1100-16/24 support 128 Static MAC
Address entries, but DGS-1100-05/08/08P only
support 32 entries.
To initiate the removal of auto-learning for any of the uplink ports, click
On
to enable this feature, and then
select the port(s) for auto learning to be disabled.
The
Static MAC Address Setting
table displays the static MAC addresses connected, as well as the VID.
Click
Add Mac
to add a new MAC address, you also need to select the assigned Port number, enter both the
Mac Address and VID and Click
Apply
. Click
Delete
to remove one entry or click
Delete all
to clear the list.
You can also copy a learned MAC address from
Dynamic Forwarding Table
(please refer to
Security >
MAC Address Table > Dynamic Forwarding Table
for details).
By disabling Auto Learning capability and specify the static MAC addresses, the network is protected from
potential threats like hackers because traffic from illegal MAC addresses will not be forwarded by the Switch.
Security > MAC Address Table > Dynamic Forwarding Table
For each port, this table displays the MAC address learned by the Switch. To add a MAC address to the
Static Mac Address List, click the
Add
checkbox, and then click
Apply
associated with the identified address.
