D-Link EasySmart Switch User Manual
2
2
5
5
Select the event message(s) to be sent out to the managing station.
System Event:
The system level messages contain:
Device Bootup -
System boot-up information
Illegal Login -
Events of incorrect password logins and records the IP of the source PC
Twisted pair Port Link Up/Link Down:
Copper port connection information
Firmware Upgrade State:
Information of firmware upgrade - success or failure
System > Password Access Control
Setting a password is a critical tool for managers to secure the EasySmart Switch. After entering the old
password and the new password two times, click
Apply
for the changes to take effect.
Figure 136 – System > Password Access Control
L2 Features > Jumbo Frame
Jumbo Frame support is designed to enhance Ethernet networking throughput and significantly reduce the
CPU utilization of large file transfers like large multimedia files or large data files by enabling more efficient
larger payloads per packet. The Jumbo Frame page allows network managers to enable Jumbo Frames on
the device.
The Jumbo Frame default is disabled, Select Enabled then click Apply to turn on the jumbo frame support.
Figure 147 – System > Jumbo Frame
NOTE:
DGS-1100-05/08/08P Supports Jumbo Frame
function, but DGS-1100-16/24 will not support it.
L2 Features > Port Trunking
The Trunking function allows the switch to combine two or four ports together to increase bandwidth. Select
the Trunking Groups, choose the Members to be grouped together, and then click
Apply
to activate the
selected Trunking Groups. Up to eight Trunking Groups may be created, each supporting up to four ports.
Disable -
Removes all the members in this trunk group.
