D-Link DXS-3610-54S, Quick Installation Manual

Page: 6 / 38

Installation
Installing the Switch without a Rack
This section is used to guide the user through installing the Switch in an area other than a switch rack. Attach
the included rubber feet to the bottom of the Switch. Take note that there should be marked blocks on the
bottom of the Switch to indicate where to attach the rubber feet. These markings are usually found in each
corner on the bottom of the device. The rubber feet cushion the Switch, protecting the casing from scratches
and preventing it from scratching other surfaces.
Figure 6. Attaching rubber feet to the Switch
Installing the Switch in a Standard 19" Rack
This section is used to guide the user through installing the Switch into a switch rack. The Switch can be
mounted in a standard 19"(1U) rack using the
rack mounting kit included in the package contents.
Fasten the frontal rack-mounting brackets to the front-sides of the Switch using the screws provided.
Figure 7. Attaching the frontal rack-mounting brackets
Figure 8. Frontal rack-mounting brackets attached
6