D-Link DXS-3610-54S, Quick Installation Manual

Page: 5 / 38

Figure 3. DXS-3610-54S Rear Panel (AC PSU)
Figure 4. DXS-3610-54S Rear Panel (DC PSU)
This following table lists the rear panel components on the Switch:
Component Description
Switch GND Use an electrical grounding wire and connect one end of the wire to the switch
GND and the other end of the wire to an electrical grounding point most commonly
found on the Switch mounting rack itself.
Fan Modules These are five hot-swappable, redundant (4+1) fan module slots on the rear panel
of the Switch. The following fan modules can be installed in these slots:
• DXS-FAN200 (Fan module with Front-to-Back airflow)
When five fans modules are installed, four fan modules will be active and the fifth
fan module will be passive until one of the four active fan modules fail.
Power Supply Module Slots There are two load-sharing power supply module slots on the rear panel of the
Switch. The following power supply modules can be installed in these slots:
• DXS-PWR700AC (AC PSU with Front-to-Back airflow)
• DXS-PWR1000DC (-48V DC PSU with Front-to-Back airflow)
Rear Panel LED Indicators
The LED indicators provide valuable information in a variety of ways like their color, blinking times, and
location.
Figure 5. DXS-3610-54S Rear Panel LED Indicators
The rear panel LED indicators are described in the following table:
LED Color Status Description
Power Supply Module Green On (Solid) Normal power supply module operation
On (Blinking) PSU module is off but standby power is supplied
Amber On (Solid) PSU/Fan failed or PSU shutdown due to critical event
On (Blinking) Warning event occurred (Power/Current/Temperature
too high or fan is too slow)
- Off Power off or PSU is on but with warning events
Fan Module Green On (Solid) Fan operation is normal
On (Blinking) Fan error occurred
- Off Power off
5