D-Link DXS-3600 Series, Cli Reference Manual

Page: 1081 / 1456

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
1076
Use the service-policy type network-qos command to attach a single type network QoS policy map to
input interfaces. A policy map need not be created before specifying it in this command. A command will
not take effect when it associates a non-existent service policy. If there is no statement in the policy map,
nothing will be performed.
Besides a single policy map (without specifying type name) for each type (input or output) on an interface,
up to one type network QoS policy map can be applied on a physical port interface at input (ingress).
Example
This example shows how to apply the policy map policy1 to a physical ingress interface.
Switch# configure terminal
Switch(config)# interface ethernet 1/0/1
Switch(config-if)# service-policy type network-qos input my_policy_map
Switch(config-if)#
86-8 show class-map type network-qos
This command is used to display the type network QoS class map configuration.
show class-map type network-qos [NAME]
Parameters
NAME (Optional) Specifies the name of the class map. The class map name
can be a maximum of 32alphanumeric characters.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use the show class-map type network-qos command to display the type network QoS class maps. If
the optional NAME argument is entered, the specified type network QoS class map and its matching
criteria will be displayed.
Example
This example shows how to display all type network QoS class maps.
Switch# show class-map type network-qos
Type network-qos class-maps
===========================
Class Map my_class_map
match cos 3,4
Class Map my_class_map_2
match cos 2