DXS-3326GSR Gigabit Layer 3 Switch
Figure 6- 4. Switch Information (Advanced Settings) window
Parameter Description
Serial Port Auto
Logout Time
Select the logout time used for the console interface. This automatically logs the user
out after an idle period of time, as defined. Choose from the following options:
2
Minutes, 5 Minutes, 10 Minutes, 15 Minutes
or
Never
. The default setting is
10 minutes
.
Serial Port Baud
Rate
The baud rate setting for the Switch is 115,200.
MAC Address
Aging Time (10-
1000000)
This field specifies the length of time a learned MAC Address will remain in the
forwarding table without being accessed (that is, how long a learned MAC Address is
allowed to remain idle). To change this, type in a different value representing the MAC
address age-out time in seconds. The
MAC Address Aging Tim
e
can be set to any
value between
10
and
1,000,000
seconds. The default setting is
300
seconds.
IGMP Snooping
To enable system-wide IGMP Snooping capability select
Enabled
. IGMP snooping is
Disabled
by default. Enabling IGMP snooping allows you to specify use of a multicast
router only (see below). To configure IGMP Snooping for individual VLANs, use the
IGMP Snooping page under the
IGMP
folder.
Multicast router
Only
Enable to support Multicast router only.
GVRP Status
Use this pull-down menu to enable or disable GVRP on the Switch.
37
