D-Link DXE-820T User Manual
In Interactive mode, use the list <view> and select <idx> commands to select the
desired target device. Use networkdiag [-p <IP address>] to run the network
diagnostics test for the selected target.
Examples:
1.
The following command runs the network test for the currently selected NDIS
adapter.
networkdiag -p 192.168.1.5
2.
The following command runs the network test for the current selected virtual
adapter.
Networkdiag
6.7.5.
Running Diagnostic Tests in Windows
The Diagnostic Tests option on the Diagnostics tab lets you check the state of the
physical components on a Broadcom network adapter. You can trigger the tests
manually, or choose to have BACS continuously perform them. If the test are
performed continuously, then the number of passes and fails in the Result field for
each test increments every time the tests are performed. For example, if a test is
performed four times and there are no fails, the value in the Result field for that test
is 4/0. However, if there were 3 passes and 1 fail, the value in the Result field is 3/1.
Notes:
This feature can be used with Windows Server managed hosts only. It is not
available for hosts operating on Linux or other OSes. You can, however use BACS
on a Linux client to connect to a Windows Server host and run the diagnostic test
utility.
You must have administrator privileges to run diagnostic tests.
The network connection is temporarily lost while these tests are running.
Some tests are not supported on all DXE-820T adapters.
To run the diagnostic tests once using the BACS GUI
1.
Click the name of the adapter to test in the Explorer View pane and select the
Diagnostics tab.
2.
From the Select a test to run list, select Diagnostic Tests.
3.
Select the diagnostic tests you want to run. Click Select All to select all tests or
Clear All to clear all test selections.
4.
Select the number of times to run the tests from Number of loops.
5.
Click Run test(s).
6.
In the error message window that warns of the network connection being
temporarily interrupted, click Yes. The results are displayed in the Result field for
each test.
