D-Link Systems, Inc.
3
DWS-1008 Install Guide
Hardware Overview
Hardware Overview
Front Panel
Console Port:
The serial console port provides a direct management connection to a
DWS-1008 switch’s command-line interface (CLI).
Ethernet Ports (1-6):
The 10/100 Ethernet ports on the DWS-1008 switch provide automatic MDI/MDX,
which automatically crosses over the send and receive signals if required. Ports
1-6 also support PoE (Power over Ethernet).
Uplink Ports (7 & 8):
Ports 7 & 8 on the switch are uplink ports only and do not support PoE.
LEDS:
Power
Solid light indicates proper connection to power source.
Link (1-8):
Solid
Link is operational.
(Amber - 10Mbps, Green - 100Mbps)
Blinking
Traffi c is active. (Amber - 10Mbps, Green - 100Mbps)
MP (1-6):
Solid green
For a DWL-8220AP’s active link, with PoE enabled,
all the following are true:
• Access point has booted.
• Access point has received a valid
confi guration from the switch.
• Management link with an access point is
operational.
Alternating green
Access point is booting with an image received from
and amber
the switch. If the LED remains in this state indefi nitely,
the boot or confi guration attempt has failed.
Solid amber
PoE is on but no access point is connected to the link.
Blinking amber
Access point is not connected or is unresponsive, or
there is a PoE problem.
Unlit
Port is not confi gured as an AP access port, or PoE
is off.
Summary of Contents for DWS-1008
Page 1: ......
Page 15: ...D Link Systems Inc 15 DWS 1008 Install Guide Notes Notes ...
