DWR-500 Quick Installation Guide
15
Step 3
Shown in Figure 34, hit the “Finish”
button to complete the setup. The router
will reboot and start functioning as a
point node.
Figure 34. Step 3 Complete Portal Node Setup.
Example Configuration 3: AP node
Step 1
Select the country where DWR-500 will
be installed. Based on Figure 26 and
Table 7, AP node is assigned as 2.
Finally, select the role of this node as
AP. See Figure 35.
Figure 35. Step 1 Setting up a AP Node.
Step 2
Shown in Figure 36, enter the Router
ID, IP Address/Mask as per the Table
7.
Figure 36. Step 2 Setting up router details for Point Node.