802.11 a/g Dual Band Access Point Command Line Interface Manual
12
set diap
Enable or Disable DIAP
set diap [disable:enable]
set dtim
Set Delivery Traffic Indication Message Beacon Rate. Default is 1
set dtim <1-255>
set encryption
Enable or Disable Encryption Mode
set encryption [disable:enable]
set eth2wlan
Enable or Disable the Eth2Wlan Broadcast packet filter feature
set eth2wlan [0:1]
Explanation: 0=disable:1=enable
set factorydefault
Restore to Default Factory Settings
set factorydefault
set fragmentthreshold
Set Fragment Threshold
set fragmentationthreshold <xxxx>
set frequency
Set Radio Frequency (MHz)
set frequency <24xx>
set gateway
Set Gateway IP Address
set gateway <xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set groupkeyupdate
Set Group Key Update Interval (in Seconds) for TKIP
set groupkeyupdate seconds
set snmp
Set SNMP State
set snmp [disable:enable]
set ipaddr
Set IP Address
set ipaddr <xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set ipmask
Set IP Network/Subnet Mask
set ipmask < xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is Network mask
set key
Used to set the specified wep key value and size
set key [1-4] default
set key [1-4] [40:104:128] < value>
set keyentrymethod
Select Between ASCII or HEX encryption key format
set keyentrymethod [asciitext : hexadecimal]
set keysource
Select Source of Encryption Keys: static(flash), dynamic (server), mixed set keysource [flash:server:mixed]
set login
Modify Login User Name
set login <username>
set syslog
Set sysLog setting
set syslog remoteip <xxx.xxx.xxx.xxx>
set syslog remotestate [0:1]
set syslog localstate [0:1]
set syslog sysstate [0:1]
set syslog wirelessstate [0:1]
set syslog othersestate [0:1]
set syslog clear all
Explanation: 0=disable:1=enable
set password
Modify Password
set password <new password>
set passphrase
Modify Passphrase
set passphrase <new passphrase>
set power
Set Transmit Power in predefined increments
set power [full:half:quarter:eighth:min]
set roguestatus
Enable or Disalbe Rogue AP function
set roguestatus
set roguebsstypestatus
Enable or Disalbe Rogue AP BSS Type function
set roguebsstypestatus [disable:enable]
set roguebsstype
Set Rogue AP BSS Type
set roguebsstype [apbss:adhoc:both]
set roguesecuritystatus
Enable/Disalbe Rogue AP Security
set roguesecuritystatus [disable:enable]
set roguesecurity
Set Rogue AP Security Type
set roguesecurity
Note: After enter this command, the CLI will list the security type for
selection