802.11 a/g Dual Band Access Point Command Line Interface Manual
7
3
CLI
C
OMMANDS
The following is a complete list of the Command Line Interface (CLI) commands along with their respective arguments.
Access Point CLI command
Function
Syntax
Config Commands:
config wlan
Select WLAN Adapter to configure. Only WLAN 1 is available for
configuration. This command is not necessary.
config wlan [0:1]
Delete Commands:
del acl
Delete specified Access Control List entry
del acl [1-16]
del wdsacl
Delete specified WDS ACL entry: 1-8
del wdsacl [1-8]
del key
Delete specified Encryption key
del key [1-4]
DHCP Server Help Command:
dhcps help
Display DHCP Server Command Help
dhcps help
dhcps state
get DHCP Server state
dhcps state
dhcps state <on|off>
set to on or off DHCP Server
dhcps state [on|off]
dhcps dynamic info
get current settings
dhcps dynamic info
dhcps dynamic ip
set start ip
dhcps dynamic ip <x.x.x.x>
dhcps dynamic mask
set netmask
dhcps dynamic mask <x.x.x.x>
dhcps dynamic gw
set gateway
dhcps dynamic gw <x.x.x.x.>
dhcps dynamic dns
set dns
dhcps dynamic dns <x.x.x.x>
dhcps dynamic wins
set wins
dhcps dynamic wins <x.x.x.x>
dhcps dynamic range
set range
dhcps dynamic range [0-255]
dhcps dynamic lease
set lease time (sec.)
dhcps dynamic lease [60-31536000]
dhcps dynamic domain
set domain name
dhcps dynamic domain <string..>
dhcps dynamic state
set state
dhcps dynamic state [on:off]
dhcps dynamic map
get mapping list
dhcps dynamic map
dhcps static info
get setting from <0-255> to <0-255>
dhcps static info [0-255] [0-255]
dhcps static ip
set static <id> pool start ip
dhcps static <id> ip <x.x.x.x>
dhcps static mask
set static <id> pool netmask
dhcps static <id> mask <x.x.x.x>
dhcps static gw
set static <id> pool gateway
dhcps static <id> gw <x.x.x.x.>