Wireless Controller
CLI Reference Guide
103
12.40
net routing protocol_binding delete
<ltrow_id>
S.No
Com mand Nam e
Description
Type and Description
1
<ltrow_id>
protocol_binding rules configuration mode.
Unsigned integer
2
save
Save Protocol-Binding rules configuration
changes.
3
exit
Save Protocol Binding rules configuration
changes and exit current mode.
4
cancel
Roll back configuration changes.
5
Service
Available Service
service type
6
Local_Gatew ay
local gatew ay type
OPTION interface type
7
Source_Netw ork
source netw ork type
firew all rule address type
8
Destination_Netw ork
destination netw ork type
firew all rule address type
9
source_address_start
starting IP of the Source Netw ork
IP address AAA.BBB.CCC.DDD w here each
part is in the range 0-255
10
source_address_end
ending IP of the Source user
IP address AAA.BBB.CCC.DDD w here each
part is in the range 0-255
11
destination_address_start start IP of the Destination user
IP address AAA.BBB.CCC.DDD w here each
part is in the range 0-255
12
destination_address_end ending IP of the Destiation user
IP address AAA.BBB.CCC.DDD w here each
part is in the range 0-255
12.41
net radvd configure
S.No
Com mand Nam e
Description
Type and Description
1
save
Save radvd configuration changes.
2
exit
Save radvd configuration changes and exit
current mode.
3
cancel
Roll back radvd configuration changes.
4
enable
enable the RADVD process here to allow
stateless auto configuration of the IPv6 LAN
netw ork
Boolean choice
5
mode
select N to send router advertisements (RAb
s)
to all interfaces else Y
radvd advertizement mode type
6
interval
The time in seconds betw een sending unsolicited
multicast RAb
s. The default is 30 seconds.
PPPOE idle timeout Type.
7
flags
RA Flags
8
flags
managed_enable
Chose Managed to use the administered /stateful
protocol for address auto configuration
Boolean choice
9
flags other_enable
the Other flag is selected the host uses
administered/stateful protocol of other (i.e. non-
address) information auto configuration.
Boolean choice
10
preference
Chose betw een low /medium/high for the
preference associated w ith this routerb
s
RADVD process
radvd preference type
11
mtu
This is used in RAb
s to ensure all nodes on
the netw ork use the same MTU value in the cases
w here the LAN MTU is not w ell know n. The
mtu size