Wireless Controller
CLI Reference Guide
98
bcd:abcd w here each part is in the
range [0-9A-Fa-f:]
13
static secondary_dns Set ipv6 secondary dns address
IP address
abcd:abcd:abcd:abcd:abcd:abcd:a
bcd:abcd w here each part is in the
range [0-9A-Fa-f:]
14
pppoe
pppoe over ipv6 configuration parameters
15
pppoe username
Enter the username to authenticate
String
16
pppoe passw ord
Enter the passw ord to authenticate
String
17
pppoe authOpt
Enter the Auth Option to authenticate
PPPOE Authentication Types.
18
pppoe dhcpv6_opt
Enter the dhcpv6 option for configuring additional
parameters.
OPTION interface type
19
pppoe primary_dns Valid primary DNS Server IP Address
IP address
abcd:abcd:abcd:abcd:abcd:abcd:a
bcd:abcd w here each part is in the
range [0-9A-Fa-f:]
20
pppoe secondary_dns Valid secondary DNS Server IP Address
IP address
abcd:abcd:abcd:abcd:abcd:abcd:a
bcd:abcd w here each part is in the
range [0-9A-Fa-f:]
12.32
net routing ospfv2 configure
<ltinterface>
S.No
Com mand Nam e
Description
Type and Description
1
<ltinterface>
ospfv2 configuration mode.
2
save
Save OSPFv2 configuration changes.
3
exit
Save OSPFv2 configuration changes and exit current
mode.
4
cancel
Roll back configuration changes.
5
enable
Enable/Disable OSPFv2 for a particular interface.
Boolean choice
6
area
Give the area to w hich the interface belongs
Unsigned integer
7
priority
Helps to determine the OSPFv2 designated router for a
netw ork.The router w ith the highest priority w ill be more
eligible to become Designated Router. Setting the value
to 0, makes the router ineligible to be come Designated
Router. The default value is 1.
Unsigned integer
8
hello_interval
The number of seconds for HelloInterval timer
value.Setting this value, Hello packet w ill be sent every
timer value seconds on the specified interface. This value
must be the same for all routers attached to a common
netw ork. The default value is 10 seconds.
Unsigned integer
9
dead_interval
The number of seconds that a deviceb
s hello packets
must not have been seen before its neighbors declare
the OSPF router dow n.This value must be the same for
all routers attached to a common netw ork.The default
value is 40 seconds.
Unsigned integer
10
cost
The cost of sending a packet on an OSPFv2 interface
Unsigned integer
11
auth_type
Give the authentication type used for OSPFv2.If
Authentication type is none the interface does not
authenticate ospf packets.If Authentication Type is
OSPF Authentication type
