Wireless Controller
CLI Reference Guide
29
configuration for the selected group
56
system group access_control_browser
List of brow sers for w hich login
policies can be applied
57
system group access_control_browser add
Add a brow ser to Access Control
brow sers list
58
system group access_control_browser delete
<ltrow_id>
Delete a brow ser from Access
Control brow sers list
59
system group access_control_browser show
Displays Access Control brow sers list
60
system group access_control_ip
List of ips for w hich login policies can
be applied
61
system group access_control_ip add
Add an ip to Access Control ips list
62
system group access_control_ip delete
<ltrow_id>
Delete an ip from Access Control ips
list
63
system group access_control_ip show
Displays Access Control ips list
7.4 UTIL configuration commands
The command util at the CLI prompt would give the description of all the configuration
commands in the branch util , which is as follows:
Sl No
Com m and Nam e
Purpose
1
util restore-factory-defaults
Revert to factory default settings.
2
util system_check
system check options
3
util system_check ping
<ltip_address>
Ping an Internet Address.
4
util system_check dns_lookup
<ltdns>
To retrieve the IP address of a Web,
FTP, Mail or any other Server on
the Internet
5
util system_check traceroute
<ltip_address>
display all the routers present
betw een the destination IP address
and this router
6
util system_check display_IPV4_routingtable
Display IPV4 Routing Table
7
util system_check capturePackets
Allow s you to capture all packets
that pass through the selected
interface
8
util system_check capturePackets start
<ltinterface>
Start the packet capture
9
util system_check capturePackets stop
Stop the packet capture
10
util system_check capturePackets dow nload
<ltfileName>
<ltipAddr>
Dow nload the packet capture to the
host machine
11
util reboot
Reboot the system.
12
util cat
<ltfileName>
Concatenate files and print on the
standard output.
13
util md5sum
<ltfileName>
Compute and check MD5 message
digest.
14
util copy
<ltfileName1>
<ltfileName2>
Copy the Files.
15
util usb_test
<ltipAddr>
<ltfileName>
To test the USB.
7.5 QoS configuration commands
The command qos at the CLI prompt would give the description of all the configuration
commands in the branch qos , which is as follows:
Sl No
Com m and Nam e
Purpose
1
qos lan
Configure qos parameters for lan
2
qos option
Configure qos parameters for option
