D-Link DVG-3004S User Manual
63
-line Specify which line number you want to set the account.
-name Specify user name.
-password Specify password.
Example:
security -line 1 -name kkk -password 12345
usr/config$
Parameter Usages:
print out all current settings of security.
-line
the line number, which you want to define the security info
-name
the name is as same as the SIP number.
-password the password for the authentication if it is the necessary for
the proxy.
4.2.13 [line]
This command is for configure each line parameters of Gateway.
-------------------------------------------------------------------------------------------------
usr/config$ line
Gateway line information and configuration
Usage:
line -config number [hunt number][hotline number]
line -print Gateway line information.
hunt Hunting group.
hotline Hot line configuration.
Example:
line -config 1 hunt 1 hotline 1003
usr/config$
Parameter Usages:
print out all current settings of line
-config
determine which line to configure
-hunt
set hunting group flag of each line. User can assign different
hunt group number represent different hunt group.
-hotline
set hotline table.The Hotline Mode is applied in limited two
channels. Users just make calls into the FXO port and
