D-Link DVG-3004S User Manual
62
print current h323 related settings
-mode
alternatives for proxy or peer-to-peer mode (1=proxy mode;
0=peer-to-peer mode). If users select proxy mode, a valid
proxy is needed when Gateway is in operation.
-----------------------------------------------------------------------------------------------
usr/config$ sip –mode 0 (peer to peer mode)
-px
to assign the ip address of the proxy when Gateway is in
proxy mode.
-pxport
define the proxy port for the registration or call.
-outpx
define the out bound proxy for the endpoints.
-prefix
this will be prefix the alphabets before the sip line number.
-line1
assign FXO Line1 number.
-line2
assign FXO Line2 number.
-line3
assign FXO Line3 number.
-line4
assign FXO Line4 number.
Note:
User can also set “x” in line number to disable the port. If the port is
disabled, it can only receive calls but not calling out.
-expire
It just like the TTL function in H323, the gateway will make
sure the registration is success or not for a period times.
-port
define the local sip port for this gateway.
-rtp
to allocate RTP port range—NOT RECOMMENDED. This
may be used when RTP port range conflicts with Firewall
policy. (each port of Gateway use 2 RTP ports)
4.2.12 [security]
This is the authentication for the SIP account.
----------------------------------------------------------------------------------------------
usr/config$ security
Secuirty information and configuration
Usage:
security [-name username] [-password password]
security -print
-print Display system account information and configuration.
