D-Link DVG-3004S User Manual
84
Note: To set mac address please key in command setmac:(when key in
MAC address ,press enter each time after key in two characters)
Please get the MAC address from the bottom of your FXO VOIP units.
-------------------------------------------------------------------------------------------------
usr/config$ setmac
- enter mac address (xxxxxxxxxxxx):
0001a8002baa
- the mac address is 00 01 a8 00 2b aa
- if mac address is correct,please press 'y' to
setup configuration,else press 'n' to continue
y
-------------------------------------------------------------------------------------------------
-greeting
The greeting file can be updated by users. The attributes of
sound file should complied to:
μ
-law, 8000 Hz , 8 bit, Mono,
7 kb/s
-askpin
update ASKPIN sound file. This is the greeting sound that
when asking for pincode.
-s
to specify TFTP server’s IP address when upgrading ROM
files.
-f
to specify the target file name, which will replace the old one.
-method
to decide using TFTP or FTP as file transfer server. “0” stands
for TFTP, while “1” stands for FTP.
-ftp
if users choose FTP in above item, it is necessary to specify
pre-defined username and password when upgrading files.
4.2.24 [passwd]
For security concern, users have to input the password before entering
configuration mode.
-------------------------------------------------------------------------------------------------
usr/config$ passwd
Password setting information and configuration
Usage:
