DSL-G624M Wireless ADSL Router User’s Guide
56
B
IP Address Setup
The DSL-G624M is designed to provide network administrators maximum flexibility for IP addressing on the Ethernet
LAN. The easiest IP setup choice in most cases is to let the Router do it using DHCP, which is enabled by default. This
appendix briefly describes various options including DHCP, used for IP setup on a LAN. If you are new to IP
networking, the next appendix provides some background information on basic IP concepts.
Assigning Network IP Addresses
The IP address settings, which include the IP address, subnet mask and gateway IP address are the first and most
important internal network settings that need to be configured. The Router is assigned a default LAN IP address and
subnet mask. If you do not have a preexisting IP network and are setting one up now, using the factory default IP
address settings can greatly ease the setup process. If you already have a preexisting IP network, you can adjust the IP
settings for the Router to fit within your existing scheme.
Using the Default IP Address
The Router is shipped with a preset default IP address setting of 192.168.1.1 for the LAN port. There are two ways to
use this default IP address, you can manually assign an IP address and subnet mask for each PC on the LAN or you can
instruct the Router to automatically assign them using DHCP. The simplest method is to use DHCP. The DHCP
function is active by default.
Manual IP Address Assignment
Manually configuring IP settings for the LAN means you must manually set an IP address, subnet mask and IP address
of the default gateway (the Router’s IP address) on each networked computer. The example listed below describes IP
configuration for computers running Windows 95 or Windows 98. Regardless of what operating system is used on each
workstation, the three network IP settings must be defined so the network interface used by each workstation can be
identified by the Router, and vice versa. For detailed information about configuring your workstations IP settings,
consult the user’s guide included with the operating system or the network interface card (NIC).
1.
In Windows 95/98, click on the
Start
button, go to
Settings
and choose
Control Panel
.
2.
In the window that opens, double-click on the
Network
icon.
3.
Under the Configuration tab, select the
TCP/IP
component and click
Properties
.
4.
Choose the
Specify an IP address
option and edit the address settings accordingly. Consult the table below for IP
settings on a Class C network.
Using Default IP without DHCP
Host
IP Address
Subnet Mask
Gateway IP
Router
192.168.1.1 255.255.255.0
Computer #1
192.168.1.2 255.255.255.0 192.168.1.1
Computer #2
192.168.1.3 255.255.255.0 192.168.1.1
Computer #3
192.168.1.4 255.255.255.0 192.168.1.1
IP Setup - Example #1
Please note that when using the default IP address as in the above example, the first number in the IP address must
always be the same with only the second, third and fourth number changing. The first number defines the network IP
address (all machines must belong to the same IP network), while the last three numbers denote the host IP address
(each computer must have a unique address to distinguish it on the network). The IP address scheme used in Example
Summary of Contents for DSL-G624M
Page 1: ...DSL G624M Wireless108GMIMOADSL2 2 Router User sGuide August 2005 ...
Page 2: ......
Page 10: ......
