D-Link DSL-G624M, User Manual

Page: 29 / 69

DSL-G624M Wireless 108G MIMO ADSL2/2+ Router User’s Guide
19
Configure Basic Wireless Settings
Follow the instructions below to change basic wireless settings.
1. To disable the Wireless Radio : click Disabled beside the Wireless Radio field and click the Apply button.
This will immediately disable the wireless access point, it is not necessary to restart the access point to make
this change.
2. If the Wireless Radio has been disabled: click the Enabled beside the Wireless Radio field and click the
Apply button. It is not necessary to restart the access point unless you have also changed the channel or SSID.
3. The SSID can be changed to suit your wireless network. Remember that any wireless device using the access
point must have the same SSID and use the same wireless channel number. The SSID can be a continuous
character string (i.e. no spaces) of up to 16 characters in length. To disable SSID sharing (SSID broadcast),
click to select
Enabled beside the SSID Hidden field. Click the Apply button to save any change to the SSID.
A hidden SSID makes it more difficult for wireless clients to join or leave the SSID as they must have the
identical SSID manually entered to be able to join your wireless LAN.
4. The Channel drop-down menu may be changed to channels that are available in your region 1-13 in
Europe. Channels available for wireless LAN communication are subject to regional and national regulation.
Click the
Apply button to save any change to the Channel. D-Link recommend that you select a channel that is
not in use. By of factory default Channel 6 is used . If you find it is already being used in your neighborhood
we would suggest either channel 1 or 13 as the are the next non-overlapping channels.
Note in Super G Mode you will not be able to select a channel, the 2XR MIMO technology will select the best channel.
5. Super G mode – please choose the wireless mode you wish to transmit and receive at.
802.11b Only mode – Use this mode if you only have 11b devices.
802.11g Only Mode - Use this mode if you only have 11g devices.
SuperG With Dynamic Turbo – Super G, D-Link 108G* High performance mode, 2XR functions are
enabled. The transmitter will increase the signal if other devices are not broadcasting a same time on the same
channel. Use this mode in areas where there is a higher Wireless network density to maintain maximum
performance.
Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This setting is backwards
compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all nodes on the
wireless network is Super G with Dynamic Turbo enabled.
SuperG With Static Turbo – Super G, D-Link 108G* High performance MIMO mode, all 2XR functions are
enabled. The transmitter will send a signal over the frequencies for wireless networks to achieve maximum
performance for your network. Use this mode only in areas where there is a low Wireless network density to
achieve optimum performance.
Capable of Packet Bursting, FastFrames, Compression, and Static Turbo. This setting is not backwards
compatible with non-Turbo (legacy) devices. Static turbo mode is always on and is only enabled when all
nodes on the wireless network is Super G with Static Turbo enabled.
B and G Compatible - Use this mode if you only have 11b and 11g device in use at the same time.
* Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate
6. Make sure you save the new wireless settings. Use the System Settings menu to save the new settings.