DSL-G624M Wireless ADSL Router User’s Guide
28
Static IP Address for Connection WAN
WAN
Settings -
Static IP
1.
Choose the
RFC2684Bridged
option from the click-boxes beside the
WAN Type
field.
2.
Under the
VPI/VCI
at the top of the menu should not be changed unless you have been instructed to change
them. However, if you are instructed to change the
VPI
or
VCI
values, type in the values assigned for your
account. Leave the
PVC Number
setting at the default (
Pcv0
) values for now. This can be used later if you are
configuring multiple virtual circuits for your ADSL service.
3.
Under the
Connection Type
field, you can choose from
Pure Bridged, Static IP,
or
DHCP
from the click-
boxes. This defines both the connection type used for your ADSL service. These instructions are for the
Static
IP
option. The other options are discussed below. The menu will change entry fields to allow the entry of the
necessary information based upon your selection.
4.
In the
Encap
. field, you can choose
LLC
or
VcMux
as the encapsulation type by clicking the click-box beside
the
Encap.
field
−
as instructed by your ISP.
5.
Change the
IP Address
,
Subnet Mask
,
Gateway Address
as instructed by your ISP. These are the global IP
settings for the WAN interface. This is the “visible” IP address of your account. Your ISP should have
provided these IP settings to you.
6.
When you are satisfied that all the WAN settings are configured correctly, click on the
Apply
button.
Note
The settings and menus for the
RFC2684Bridged
−
Static IP
and the
RFC2684Routed
connection types are identical. Follow the instructions above for both connection types.
When the Router is configured to use Static
IP Address assignment for the WAN
connection, you must manually assign a
global IP Address, Subnet Mask and
Gateway IP Address used for the WAN
connection. Most users will also need to
configure DNS server IP settings in the DNS
Settings configuration menu (see below).
Follow the instruction below to configure the
Router to use Static IP Address assignment
for the WAN connection.
To configure a Dynamic IP Address
connection, perform the steps listed below.
Some of the settings do not need to be
changed the first time the device is set up, but
can be changed later if you choose. See the
table below for a description of all the
settings available in this menu.
Summary of Contents for DSL-G624M
Page 1: ...DSL G624M Wireless108GMIMOADSL2 2 Router User sGuide August 2005 ...
Page 2: ......
Page 10: ......
