D-Link DSL-504T User Manual Download Page 54

Page: 54 / 115

DSL-504T DSL Router User’s Guide

ATM VC Settings

ATM VC settings can be configured for all connection types in the WAN configuration menu of the Home

directory.

ATM VC Settings in WAN Settings menu

The table below describes the ATM VC settings used to configure a connection for an ADSL account.

ATM VC Parameters

Description

PVC

The Router supports using up to eight multiple virtual connections. This

window allows the user to configure WAN settings for all the available
connections (see instructions below on how to set up Multiple Virtual

Connections). Use the PVC drop-down menu to select the connection
(Pvc0 to Pvc7) you want to configure. Since most users will use only a

single connection, the default setting Pvc0 can be used for any changes
made to the WAN settings.

VPI

The Virtual Path Identifier is used with the VCI to define a dedicated

circuit on the ATM network portion of the connection to the Internet and
WAN. Most users will not need to change this setting.

VCI

The Virtual Channel Identifier is used with the VPI to define a dedicated

circuit on the ATM network portion of the connection to the Internet and

WAN. Most users will not need to change this setting.

Virtual Circuit

As with the PVC setting, this is mainly for use by clients who are
configuring the Router for multiple virtual connections. Use this to enable

or disable the PVC you are currently configuring. By default, the Pvc0 is

Enabled and the remaining PVCs are disabled.

Summary of Contents for DSL-504T




















































































































Search results

Summary of Contents for DSL-504T

Reviews:

Related manuals for DSL-504T

Brands by name

Popular brands

D-Link DSL-504T, User Manual

Search results

Summary of Contents for DSL-504T

Reviews:

Related manuals for DSL-504T

Brands by name

Popular brands