DSL-504T DSL Router User’s Guide
41
PPPoE and PPPoA Settings in detail
The example menu below is a section of the WAN settings for PPPoE and PPPoA connection types. Most
users will only need to enter a User Name and Password.
PPPoE/PPPoA WAN settings section (enlarged view)
To configure a PPPoE or PPPoA type WAN connection, follow these steps:
1.
If not already selected, choose the PPPoE/PPPoA option from the WAN Settings pull-down menu.
PPPoE/PPPoA is selected by default if you are configuring the Router for the first time.
2.
Under the ATM VC Settings at the top of the window should not be changed unless you have
been instructed to change them. However, if you are instructed to change the VPI or VCI values,
type in the values assigned for your account. Leave the PVC and Virtual Circuit setting at the
default (Pcv0 and Enabled) values for now. This can be used later if you are configuring multiple
virtual circuits for your ADSL service. For more information on ATM VC Settings, see the table on
page 46 below.
3.
Under the PPPoE/PPPoA heading, type the User Name and Password used for your ADSL
account. A typical User Name will be in the form
. The Password may be
assigned to you by your ISP or you may have selected it when you set up the account with your
ISP.
4.
Choose the correct Authentication Type from the drop-down menu. Most users will want to
leave the setting on Auto. PAP and CHAP are the other two options. The Auto setting will
automatically detect the correct type of authentication.
Summary of Contents for DSL-504T
Page 1: ...DSL 504T ADSL Router User Guide January 2007 ...
Page 19: ...DSL 504T DSL Router User s Guide 11 Click the start installation button Click the NEXT button ...
Page 20: ...DSL 504T DSL Router User s Guide 12 Click the NEXT button Click the NEXT button ...
