DSL-504T DSL Router User’s Guide
37
Static IP Address
When the Router is configured to use Static
IP Address assignment for the WAN
connection, you must manually assign a
global IP Address, Subnet Mask and
Gateway IP Address used for the WAN
connection. Most users will also need to
configure DNS server IP settings in the DNS
Configuration window (see below). Follow
the instruction below to configure the
Router to use Static IP Address assignment
for the WAN connection.
To configure a Static IP Address connection,
perform the steps listed below. Some of the
settings do not need to be changed the first
time the device is set up, but can be
changed later if you choose. See the table
below for a description of all the settings
available in this window.
WAN Settings window - Static IP
To configure a Static IP type connection for the WAN, follow these steps:
1.
Choose the Static IP Address option from the WAN Settings pull-down menu.
2.
Under the ATM VC Settings at the top of the window should not be changed unless you have
been instructed to change them. However, if you are instructed to change the VPI or VCI values,
type in the values assigned for your account. Leave the PVC and Virtual Circuit setting at the
default (Pcv0 and Enabled) values for now. This can be used later if you are configuring multiple
virtual circuits for your ADSL service. For more information on ATM VC Settings, see the table on
page 46 below.
Summary of Contents for DSL-504T
Page 1: ...DSL 504T ADSL Router User Guide January 2007 ...
Page 19: ...DSL 504T DSL Router User s Guide 11 Click the start installation button Click the NEXT button ...
Page 20: ...DSL 504T DSL Router User s Guide 12 Click the NEXT button Click the NEXT button ...
