D-Link DSL-362T User Manual Download Page 42

Page: 42 / 69

DSL-362T ADSL Modem User

’

s Guide

System Commands

These menu options are used to save setting, restart (reboot) the Modem or reset the configuration to the factory
settings.

Figure 4-5. Tools

–

System Commands window

Save All

In order to save the configuration changes you have just made they must be saved to the Modem

’

s non-volatile

RAM by clicking on the

Save All

button.

Restart

Click the

Restart

button to restart the Modem. If you have not saved your changes, the Modem will revert to the

previously saved configuration upon rebooting the Modem.

Restore

The DSL-362T can be reset to the default configuration for all settings using the Restore option. This will also
change the both the LAN and WAN IP address of the device, so these will need to be reconfigured accordingly.

To perform a factory reset, click the

Restore

button. Since the IP settings will return to their default, you will

lose access to the Web Manager. To use the Web Manager interface, the LAN IP address will need to be
reconfigured.

Summary of Contents for DSL-362T






































































Search results

Summary of Contents for DSL-362T

Reviews:

Related manuals for DSL-362T

Brands by name

Popular brands

D-Link DSL-362T, User Manual

Search results

Summary of Contents for DSL-362T

Reviews:

Related manuals for DSL-362T

Brands by name

Popular brands