DSL-362T ADSL Modem User
’
s Guide
21
PPPoE
The required information used to setup a PPPoE connection is identical to that needed for a PPPoA connection.
Make sure you have selected PPPoE from the
Type:
pull-down menu so that you are now configuring setting in
the menu titled
“
PPPoE Connection Setup
”
. Follow the instructions below to set up the connection.
Figure 3-5. Setup Connection (PPPoE) window
To configure a PPPoE connection, perform the steps listed below. Some settings may not be required to be
changed now but can be changed later if you choose.
1. Type in a
Name
in the space provided if you wish or leave the default name.
2. Make sure
PPPoE
appears listed as the
Type:
of connection protocol used.
3. Do not change the
VPI
or
VCI
values unless you are required to do so. If these settings are incorrect, the
ADSL connection will not function. Many users will be able to use the default settings. If you are told to
change these, type in the values given to you by your service provider.
4. Leave the default
QoS
values if you are unsure or the ISP did not provide this information.
5. Do not change the
PCR
or
SCR
values unless you are required to do so. If you are told to change these, type
in the values given to you by your service provider.
6. Supply a
Username
and
Password
used to verify the identity of your account. These are usually provided
by your ISP.
7. The
Encapsulation
values LLC (SNAP) and VC (MUX) are two different methods of encapsulating the
PPP packet. Contact your ISP to make sure which encapsulation is being supported.
Change
connection
type here
Summary of Contents for DSL-362T
