DSL-360T ADSL Modem User’s Guide
24
1. Type in a
Name
in the space provided.
2. Select
CLIP
under
Type
.
3. Under
Options
, enable
NAT
and/or
Firewall
by selecting the appropriate checkbox.
This option is not
available for a Bridge connection.
4. Based upon the information your ISP provided, enter the
IP Address
(e.g. 168.128.1.1), the Subnet
Mask
(e.g. 255.255.255.0),
ARP Server
(e.g. 168.128.1.2) and the
Default Gateway
(e.g. 168.128.1.1).
5. Do not change the
VPI
or
VCI
values unless you are required to do so. If these settings are incorrect, the
ADSL connection will not function. Many users will be able to use the default settings. If you are told to
change these, type in the values given to you by your service provider.
6. Leave the default
QoS
values if you are unsure or the ISP did not provide this information.
7. Do not change the
PCR
or
SCR
values unless you are required to do so. If you are told to change these, type
in the values given to you by your service provider.
8. Click
the
Apply
button when you have entered all the information. The web browser will briefly go blank.
After a few seconds the new connection you just configured will be listed in the left panel of the Setup
window as “Connection 1,” “Connection 2,” “Connection 3,” etc.).
9. To make your temporarily saved connection permanent, click the
Save All
button in the
System
Commands
window on the
Tools
tab.
Summary of Contents for DSL-360T
