DSL-360T ADSL Modem User’s Guide
20
To setup a PPPoA connection for the first time:
1. Type in a
Name
in the space provided if you wish or leave the default name.
2. Make
sure
PPPoA
appears listed as the
Type:
of connection protocol used.
3. Do not change the
VPI
or
VCI
values unless you are required to do so. If these settings are incorrect, the
ADSL connection will not function. Many users will be able to use the default settings. If you are told to
change these, type in the values given to you by your service provider.
4. Leave the default
QoS
values if you are unsure or the ISP did not provide this information.
5. Do not change the
PCR
or
SCR
values unless you are required to do so. If you are told to change these, type
in the values given to you by your service provider.
6. Supply
a
Username
and
Password
used to verify the identity of your account. These are usually provided
by your ISP.
7. The
Encapsulation
values LLC (SNAP) and VC (MUX) are two different methods of encapsulating the
PPP packet. Contact your ISP to make sure which encapsulation is being supported.
8. For most users, the remaining settings will not need to be changed. See your ISP for further information.
9. Click
the
Apply
button when you have entered all the information. The browser window may briefly go
blank. After a few seconds the new connection you just configured will become the active connection for the
Modem.
10. To make your temporarily saved connection permanent, click the
Save All
button in the
System
Commands
window on the
Tools
tab.
Summary of Contents for DSL-360T
