D-Link DSL-310 User Manual Download Page 58 | Manualshive

Page: 58 / 68

background image

DSL-310 ADSL Modem User’s Guide

Firmware

You can upgrade the firmware of the ADSL Modem at this page. Make sure the firmware you want to use
is on the local hard drive of the computer. Click on Browse to browse the local hard driver and locate the
firmware to be used for the update. Please check the D-Link support site for firmware updates at D-Link
Technical support website of your country.

In order to keep pace with changes in ADSL standards and technology the DSL-310 allows
you to easily update the embedded firmware. You may obtain the latest version of the
DSL-310 firmware by logging onto the D-Link web site at D-Link Technical support website of
your country. The Update Firmware window lists the version of the firmware the Modem is
currently using. If you would like to update, follow the instructions given on the D-Link web site
firmware update page to download the new firmware. You can then use the DSL-310 Firmware
Upgrade Utility included with the Modem to transfer the new firmware to the Modem.

1. Click the Browse button to find the file which downloaded from D-Link Web server.

2. Choice the file (FIRMWARE.DLF).

«
...
56
57
58
59
60
...
»

Summary of Contents for DSL-310





































































Reviews:

No comments

Related manuals for DSL-310

Brand: Vega Absolute Pages: 33

Brand: TP-Link Pages: 98

Microwave link BT Series

Brand: Summit Pages: 8

Brand: Hal Communications Pages: 30

Brand: Moeller Pages: 4

Mblaze Ultra Wi-Fi

Brand: Zte Pages: 73

Roadster Series

Brand: NetComm Pages: 8

Brand: NetComm Pages: 2

Brand: NetComm Pages: 5

Brand: NetComm Pages: 15

Brand: NetComm Pages: 2

Mega-i-Modem 56

Brand: NetComm Pages: 16

Bridge/Router 56K V90

Brand: NetComm Pages: 2

Brand: NetComm Pages: 14

Brand: Zte Pages: 16

Brand: Ebyte Pages: 17

RC801-60B-FV35 Series

Brand: Raisecom Pages: 30

Brand: Ubee Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands