DSL-302G ADSL Modem User’s Guide
Accessing the Modem’s Web Configuration Manager
Once the computer has IP settings that allow it to access the web-based configuration software, you can change
the settings to enable the Modem to connect to the Internet.
If the browser software on the computer you are using is configured to use a proxy server for Internet access, it is
necessary to first disable the proxy connection.
Note
Be sure that the web browser on your computer is not configured to use a proxy
server in the Internet settings. In Windows Internet Explorer, you can check if a
proxy server is enabled using the following procedure:
1. In Windows, click on the START button, go to Settings and choose
Control Panel.
2. In the Control Panel window, double-click on the Internet Options icon.
3. Click the Connections tab and click on the LAN Settings button.
4. Verify that the “Use proxy server” option is NOT checked. If it is
checked, click in the checked box to deselect the option and click OK.
Alternatively you can access this Internet Options menu using the Tools pull
down menu in Internet Explorer.
To use the web-based management software, launch your web browser software and use the LAN IP address of
the Modem to access the management software. The default LAN IP address of the Modem is used in the
Address bar of your web browser window.
If you are using an Ethernet NIC to connect your computer to the modem, type in
http://
followed by the default
IP address,
10.1.1.1
in the address
bar of the browser. The URL in the address bar should read:
http://10.1.1.1
If you are using a USB port to connect your computer to the modem, type in
http://
followed by the default IP
address,
10.1.1.2
in the address
bar of the browser. The URL in the address bar should read:
http://10.1.1.2
You
can also use the
DSL 302G USB Config
link that the USB Driver installation program will put on your
computer’s desktop.
A new window appears prompting you for a user name and password needed to gain access the web
configuration manager.
Use the default User Name:
admin
and Password:
admin
for the first time set up. You can change the
password once you have established the ADSL connection. The user name and password allows any computer
on the same subnet as the Modem to access the web configuration manger. This password can also be used to
Telnet to the device through the Ethernet or the Internet interfaces. To change this password, see the next
chapter.
Note
Do not confuse the user name and password used to access the web-based
manager with the ADSL account user name and password needed for PPP
connections to access the ADSL or network service provider’s network.
16