9
Configure the Modem
With the Configuration Utility software installed, you are ready to configure the Modem. You must enter the
VPI and VCI values that have been given to you by your ADSL service provider to define the path of
connection to the ATM network backbone.
Click the
Configuration Utility
icon to initiate the configuration of the Modem. The Configuration Utility will
locate the Modem on your LAN.
1. If the DSL-302G and corresponding MAC address does not appear in the
Device List
of the
Configuration
Utility
window, click the
Discover
button on the bottom of the window. The DSL-302G should appear in
the
Device Name
column preceded by the
MAC Address
of the device. If there are other DSL-300 Family
Modems on the same network, these may also appear in the list.
2. Double-click on the Modem in the list or highlight it and depress the Enter key. The main menu appears,
click on the
General ADSL Information
tab to configure the Modem.
3. In the new window you must enter the
VPI
and
VCI
numbers (assigned to you by your service provider).
