background image

 

 

 

available if shipping charges are prepaid by the customer and upon request. 

 

D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, 

or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s 

reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the 

foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. 

 

What Is Not Covered: 

This limited warranty provided by D-Link does not cover: Products, if in D-Link’s judgment, have been 

subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, 

repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has 

been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and 

shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage 

that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;  Any hardware, software, 

firmware or other products or services provided  by anyone other than D-Link; Products that have been purchased from 

inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their 

warranty obligation pertaining to the product.  Repair by anyone other than D-Link or an Authorized D-Link Service Office will 

void this Warranty. 

 

Disclaimer of Other Warranties: 

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS 

PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY 

WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY 

IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF 

SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE 

LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE 

OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. 

 

Limitation of Liability: 

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY 

CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF 

THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR 

CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR 

PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR 

COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA 

CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY 

SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF 

ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 

DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT 

OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT.  THE MAXIMUM LIABILITY OF D-LINK UNDER 

THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE 

FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER 

WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY 

 

Governing Law

:  This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow 

exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the 

foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner 

may also have other rights which vary from state to state. 

Trademarks:  

D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the 

property of their respective manufacturers or owners.

 

 

Copyright Statement:  

No part of this publication or documentation accompanying this Product may be reproduced in any form 

or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-
Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976.  Contents are subject to 
change without prior notice.  Copyright

©

 2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.

 

CE Mark Warning:  

This is a Class B product. In a domestic environment, this product may cause radio interference, in which 

case the user may be required to take adequate measures. 

FCC Statement:

  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference 

by one or more of the following measures: 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and receiver. 

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

               Register your D-Link product online at http://support.dlink.com/register 

Summary of Contents for DSL-302G - 8 Mbps DSL Modem





















Reviews: