14
D-Link DSL-30B ADSL+ Ethernet/USB Modem User Manual
Section 4 - Configuring Your Computer
Prior to accessing the modem through the LAN or USB port, note the following necessary configurations:
• Your PC’s TCP/IP address: 19.168.1.x (where “x” is any number between and 54)
• The modem’s default IP address: 19.168.1.1
• Subnet mask: 55.55.55.0
Below are the procedures for configuring your computer. Follow the instructions for the operating system that you are
using.
Configuring Your Computer
Windows
®
2000
These are instructions for configuring your Windows
®
000 operating system. If you are using Windows
®
XP please
proceed to page 15.
1. In the Windows taskbar, click on the
Start
button and point to
Settings > Control Panel > Network and
Dial-up Connections
(in that order).
. Click on
Local Area Connection
. When you have the Local Area Connection Status window open, click
on
Properties
.
3. Listed in the window are the installed network components. If the list includes Internet Protocol (TCP/IP),
then the protocol has already been enabled, and you can skip to Step 10.
4. If Internet Protocol (TCP/IP) does not appear as an installed component, then click on
Install
.
5. In the Select Network Component Type window, click on
protocol
and then the
Add
button.
6. Select
Internet Protocol (TCP/IP)
from the list and then click on
OK
.
Summary of Contents for DSL-2320B
Page 1: ......
