D-Link DS-510S User Manual Download Page 66

Page: 66 / 83

DSL-510 ADSL Router User’s Guide

Advanced

＞

RIP

＞

Advanced Configuration

Interface:

This field allows the user to choose the Interface (PVCs, PPP Sessions and LAN), for the RIP to be configured.

Action:

This field allows the user to Enable (Yes) or Disable (No) the specified interface for RIP.

Send:

This field allows the user to select the Send Mode (RIP Transmit)

Disabled:

The supplier transmit is disabled.

V1BC:

The supplier transmit in RIPv1 Broadcast.

V2BC:

The supplier transmit in RIPv2 Broadcast.

V2MC:

The supplier transmit in RIPv2 Multicast.

Receive:

This field allows the user to select the Receive Mode (RIP Receive)

V1:

The listener receives the RIPv1 only.

V2:

The listener receives the RIPv2 only.

V1+V2:

The listener receives the both RIPv1 and RIPv2.

Supplier and Listener are based on section 4.1 "Compatibility Switch" in RFC1723.

Current RIP:

The field displays the each interface's RIP status.

Summary of Contents for DS-510S




















































































Search results

Summary of Contents for DS-510S

Reviews:

Related manuals for DS-510S

Brands by name

Popular brands

D-Link DS-510S, User Manual

Search results

Summary of Contents for DS-510S

Reviews:

Related manuals for DS-510S

Brands by name

Popular brands