D-Link DS-510S Page 57 User Manual Download

Page: 57 / 83

DSL-510 ADSL Router User’s Guide

DNS

The DNS Configuration page allows the user to set the configuration of DNS proxy.

DNS proxy selection:

(1) Disable DNS Proxy:

The LAN port does not process the DNS query message.

(2) Use Auto Discovered DNS Servers Only:

The DNS proxy will store the DNS server IP addresses obtained from DHCP client or PPP into the table.

(3) Use User Configured DNS Servers Only:

The DNS pros will use the user-configured preferred DNS server and alternate DNS server.

(4) Auto DiUser Configured:

The DNS proxy's table has all the IP addresses of dynamically obtained and user configured DNS servers.

User Configuration:

Primary DNS Address:

Enter the Primary DNS server addresses provided by your ISP.

Secondary DNS Address:

Enter the Secondary DNS server addresses provided by your ISP.

Summary of Contents for DS-510S




















































































Search results

Summary of Contents for DS-510S

Reviews:

Related manuals for DS-510S

Brands by name

Popular brands

D-Link DS-510S, User Manual

Search results

Summary of Contents for DS-510S

Reviews:

Related manuals for DS-510S

Brands by name

Popular brands