D-Link DPH-300S User Manual Download Page 3

Page: 3 / 49

Section 1 - Product Overview

D-Link DPH-300S User Manual

Package Contents

•

D-Link DPH-300S Cordless IP Telephone

•

D-Link DPH-300S Cordless IP Telephone Connector Base

•

Power Adapter

•

Manual and Warranty on CD

•

Quick Installation Guide

•

Ethernet Cable (the DPH-300S’s Ethernet port is Auto-MDIX)

Note:

Using a power supply with a different voltage rating than the one included

with the DPH-300S will cause damage and void the warranty for this product.

System Requirements

•

Broadband Internet connection

•

Ethernet-Based Cable or DSL Modem

•

A multi-port Ethernet router (possibly integrated as part of the Cable or DSL Modem listed above).

•

100Mbps of available Internet bandwidth

•

Computer with Windows, Macintosh, or Linux-based operating system and an installed Ethernet adapter

•

Internet Explorer Version 6.0 or Netscape Navigator Version 6.0 and Above

Summary of Contents for DPH-300S


















































Search results

Summary of Contents for DPH-300S

Reviews:

Related manuals for DPH-300S

Brands by name

Popular brands

D-Link DPH-300S, User Manual

Search results

Summary of Contents for DPH-300S

Reviews:

Related manuals for DPH-300S

Brands by name

Popular brands