manualshive.com logo in svg

D-Link DPH-300S, User Manual, Page: 24 / 49

Share
Download
D-Link DPH-300S User Manual Download Page 24

Configuration 

 

D-Link DPH-300S User Manual 

 

   

 

 

 

 

 

 

 

 

 

            

24 

SETUP COMPLETED 

 
Once you have completed the Setup Wizard to configure the DPH-300S for 
its Internet connection, you will need to save the settings and restart the 
DPH-300S before the settings become active.    When you have restarted the 
DPH-300S, it will automatically connect to the Network Manager and 
complete the auto-provisioning process. 
 
Click the 

Restart 

button to save the settings and restart the router. 

 
You will now be able to connect the DPH-300S to the Internet so it can 
contact the SIP server and make telephone calls over the Internet using VoIP 
technology. 

 

Connect the DPH-300 to an available Ethernet port on your broadband router 
or modem and use your VoIP telephone.    You will hear a short tone on the 
telephone after you have dialed a number to indicate that the DPH-300S has 
successfully connected to the SIP server (registered) and the Power/Status 
LED will glow continuously.   
 

 

Summary of Contents for DPH-300S


















































Reviews:

No comments