Configuration
D-Link DPH-300S User Manual
14
Configuration
This section will show you how to configure your new D-Link DPH-300S using the web-based configuration utility.
Web-based Configuration Utility
Whenever you want to configure your DPH-300S, you can access the Configuration Menu by opening your PC’s web-browser and typing in the IP
Address assigned to the DPH-300S. The DPH-300S has DHCP enabled by default, so its IP Address will be that assigned by the DHCP server on
your LAN. This DHCP server is often contained in a multi-port Ethernet router. See your router’s documentation to determine the addresses
assigned by its DHCP server. If you do not know the IP address assigned to the DPH-300S (or you do not yet have a multi-port Ethernet router)
you can connect to the DPH-300S by the following method:
•
Connect the LAN port on the DPH-300S directly to the Ethernet
port on your PC.
•
Set your PC to have a static IP address of 10.1.1.2 with a subnet
mask of 255.0.0.0 and a default gateway of 10.1.1.1
•
Switch on the DPH-300S
•
Open the web browser on your PC
•
Type in the IP Address of the DPH-300S (
http://10.1.1.1
)
