background image

55 

 Challenge Password  
 

Some certification authorities require a challenge password to authorize later changes on 
the certificate (e.g. revocation of the certificate). The minimal length of this password is 4 
characters. 

  Confirm Challenge Password   
 

Confirmation of the Challenge Password 

 Email  
 

The email address of a contact person that is responsible for the DKVM-IP1 switch and 
its security. 

 Key length  
 

This is the length of the generated key in bits. 1024 Bits are supposed to be sufficient for 
most cases. Longer keys may result in slower response time of the DKVM-IP1 switch 
during connection establishment.

 

6.5.5 Serial 

Port 

 

Figure 6-25. Serial Port   

The DKVM-IP1 switch Serial Settings (Figure 6-25) allows you to specify what device is 
connected to the serial port and how to use it. 

  Configuration or console login   

 

Do not use the serial port for any special function, use it only for the initial configuration 
(see Table 4-1 ). 

 Modem  

 

The DKVM-IP1 switch offers remote access using a telephone line in addition to the 
standard access over the built-in Ethernet adapter. The modem needs to be connected to 
the serial interface of the DKVM-IP1 switch . 

Logically, connecting to the DKVM-IP1 switch using a telephone line means nothing else 
than building up a dedicated point-to-point connection from your console computer to the 
DKVM-IP1 switch. In other words, the DKVM-IP1 switch acts as an Internet Service 

Summary of Contents for DKVM-IP1










































































Reviews: