D-Link DIR-822 User Manual Download

Page: 62 / 235

DIR-822

AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router

User Manual

Configuring via Web-based Interface

Configuring Wireless Network

This configuration step is available for the

Router

Access point

WISP Repeater

, and

Repeater

modes.

1. On the

Wireless Network 2.4 GHz

page, in the

Network name

field, specify your own

name for the wireless network in the 2.4GHz band or leave the value suggested by the
router.

2. In the

Password

field, specify your own password for access to the wireless network or

leave the value suggested by the router (WPS PIN of the device, see the barcode label).

3. If the router is used as a Wi-Fi client, you can specify the same parameters of the wireless

network as specified for the network to which you are connecting. To do this, click the

USE

button (available for the

WISP Repeater

and

Repeater

modes only).

4. You can restore the parameters of the wireless network specified before resetting to factory

defaults. To do this, click the

RESTORE

button.

Figure 49. The page for configuring the wireless network.

Page

of 235

Summary of Contents for DIR-822












































































































































































































































Search results

Summary of Contents for DIR-822

Reviews:

Related manuals for DIR-822

Brands by name

Popular brands

D-Link DIR-822, User Manual

Search results

Summary of Contents for DIR-822

Reviews:

Related manuals for DIR-822

Brands by name

Popular brands